Cycle Count Update

Cycle Count Update

Part 1: Perform a cycle count in Factory Track
1. Open the Main Menu.
2. Tap Inventory Count.
3. Tap Cycle Count. The Cycle Count form displays.
4. Verify MAIN displays in the Whse field.
5. Select FIN-1 in Loc field. 
6. Select MB-10000 in the Item field. 
7. Tap Next.
8. Type 50 in the Qty field.
9. Tap Process.
10. Tap OK.
Part 2: Verify the update in Syteline
1. Return to SyteLine.
2. Open the Cycle Count Update form.
3. Verify that the number you counted appears in the Counted Qty field for your record.
4. Click the X on the Cycle Count Update form

    • Related Articles

    • Perform a cycle count update

      Click the Open icon on the toolbar. 2. Type cycle count up in the Filter field. 3. Click the Cycle Count Update list item. 4. Click the OK button. The Cycle Count Update form opens. 5. Use the table below to enter the following count values in the ...

    • Verify cycle count triggers

      1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type item/war in the Filter field. 3. Click the Item/Warehouse list item. 1. Click the OK button. The Item/Warehouse (Filter in Place) form opens. 2. Type rf* in the Item ...

    • Perform a cycle count generation

      1. Click the Open icon on the toolbar. 2. Type cycle count in the Filter field. 3. Click the Cycle Count Generation list item. 4. Click the OK button. The Cycle Count Generation form opens. 5. Type rf* in the Starting Item field. 6. Click the ...

    • Run the cycle count posting utility

      Part 1: Perform cycle count posting 1. Click the Open icon on the toolbar. 2. Type cycle count p in the Filter field. 3. Click the Cycle Count Posting list item. 4. Click the OK button. The Cycle Count Posting form opens. 5. Click the Process button. ...

    • Print the cycle count variance report

      1. Click the Open icon on the toolbar. 2. Type cycle count v in the Filter field. 3. Click the Cycle Count Variance Report list item. 4. Click the OK button. The Cycle Count Variance Report form opens. 5. Type rf* in the Starting Item field. 6. Click ...