Pick workbench with assigned locations

Pick workbench with assigned locations

Part 1: Generate the pick list
1.. Click the Open icon on the toolbar.
2. Type pick workbench in the Filter field.
3. Click the Pick Workbench form list item.
4. Click the OK button. The Pick Workbench form opens.
5. Click the Filter in Place icon. 
6. Verify PACK displays in the Packing Location field.
7. Verify the Assign Locations check box is selected.
8. Find two different orders from the same customer number. Locate Customer Number 2, 3, 9, 15, 
or 24 for this step.
9. Verify the Qty Ready column is greater or equal to the Qty To Pick column. Note: Each order 
must have a minimum of one line to show the grouping functionality.
If you don’t have any items that have qty ready column greater or equal to the qty to 
pick column, you can do a Miscellaneous Receipt to receive additional inventory. 
Note: If your qty to pick is 100 and you only have 10 ready you need to receive 90 
or more. Click here to watch a video on Miscellaneous Receipt. 
10. Type 1 in the Group column for the selected orders so they are combined into a single pick list.
32 Lesson 3: Using Pick, Pack, and Ship
11. Find the Item and Qty to Pick for selected lines. 
12. Write those values here.
Order ____________ Item ____________ Qty to Pick ____________
Order ____________ Item ____________ Qty to Pick ____________
13. Click the Inventory tab. 
14. Select Line 1 in the middle grid.
15. Verify the Location and Qty on Hand found in the lower grid.
16. Click the Generate button. The Pick List Report opens in a new tab.
17. Locate and write down your pick list number _____________.
18. Click the X on the Pick List Report tab. A dialog box opens with the message, “Generate was 
successful.”
19. Click the OK button. A dialog box opens with the message, “Report Submitted.”
20. Click the OK button.
21. Click the X on the Pick Workbench form
Part 2: Verify the pick list was generated
1. Click the Open icon on the toolbar.
2. Type pick maintenance in the Filter field.
3. Click the web.pickmaintenance form list item.
4. Click the OK button. The Pick Maintenance form opens.
5. Select [your first pick list number] in the grid view.
6. Click the first line item and locate the Location in the grid view. 
7. Write the Location here ______________.
8. Click the second line item and locate the Location in the grid view. 
9. Write the Location here ______________.
10. Find the Status of the pick list.
11. Write the Status here ___________________
12. Click the X on Pick MaintenanceType the step.
Part 2: Verify the pick list was generated
1. Click the Open icon on the toolbar.
2. Type pick maintenance in the Filter field.
3. Click the web.pickmaintenance form list item.
4. Click the OK button. The Pick Maintenance form opens.
5. Select [your first pick list number] in the grid view.
6. Click the first line item and locate the Location in the grid view. 
7. Write the Location here ______________.
8. Click the second line item and locate the Location in the grid view. 
9. Write the Location here ______________.
10. Find the Status of the pick list.
11. Write the Status here ___________________
12. Click the X on Pick Maintenance

    • Related Articles

    • Pick workbench without assigned locations

      Part 1: Generate the pick list 1. Click the Open icon on the toolbar. 2. Type pick workbench in the Filter field. 3. Click the Pick Workbench form list item. 4. Click the OK button. The Pick Workbench opens. 5. Click to deselect the Assign Locations ...

    • Generate an order pick list

      1. Open the Generate the Generate Order Pick list report. 3. Click the MAIN list item from the Warehouse field. 4. Click the Process button. The Order Pick List Report opens in a new tab. 5. Scroll down to see the pick list for order DC307. You will ...

    • Generate material planner workbench

      1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type material planner in the Filter field. 3. Click the Material Planner Workbench Generation list item. 4. Click the OK button. The Material Planner Workbench Generation ...

    • Print a ship pick list

      1. Click the Open icon on the toolbar. 2. Type transfer order sh in the Filter field. 3. Click the Transfer Order Ship Pick List list item. 4. Click the OK button. The Transfer Order Ship Pick List form opens. 5. Click the Transfer Order Starting ...

    • Generate a workbench and create a job

      Part 1: Generate workbench 1. Click the Open icon on the toolbar. The Select Form dialog box open. 2. Type material planner in the Filter field. 3. Click the Material Planner Workbench Generation list item. 4. Click the OK button. The Material ...