Use worksets in the work center form

Use worksets in the work center form

Part 1: Enable the workset enabled option
1. Open the Employees form.
2. .Select your Employee number from the left grid. This is the Badge ID/Employee number you 
wrote down in Exercise 1.1, Part 2, Step 4. 
3. Select the workset enabled check box found on the right-side of the form.
4. Click Save. 
5. Click the X to close the Employees form. The Work Center Navigation Home form displays.
Part 2: Adding job operations and starting worksets
1. Verify the Labor icon on the left-side of the Work Center Navigation Home form is selected to 
display the available menu buttons. If not, select it.
2. Click Work Center. The Work Center form displays. 
3. Select AS-500 from the Work Center drop-down list.
Note: This field is indicated with a Factory ( ) icon near the top of the form. 
4. Click the Job List tab.
5. Click DJ00000255. Note: The job will be highlighted in light blue when selected.
6. Click Add Setup. The Workset Maintenance form displays. 
7. Verify Setup is selected from the Order Type drop-down list. If not, select it.
8. Verify DJ00000255 is selected from the Job drop-down list. If not, select it. The Item number
and Description are displayed on the Add Details tab.
9. Select 0 from the Suffix drop-down list.
10. Verify 30 is selected from the Operation drop-down list. If not, select it.
11. Click Add. The operations and tasks in the workset are displayed in the grid on the Workset
tab. There are two rows added.
12. Select Indirect from the Order Type drop-down list.
13. Select MT1 from the Indirect Code drop-down list.
14. Click Add. The operations and tasks in the workset are displayed in the grid on the Workset
tab. There are now three rows total.
15. Click Start All. Notice the Start Time displays.
16. Click Close. The Work Center form displays.
17. Click the Active tab. The jobs you created will be displayed on the Active tab. There will be two 
listed on the Active tab.
Part 3: Stopping worksets
1. Click End All. The two jobs listed have been removed.
2. Click Close. The Work Center Navigation Home form displays

    • Related Articles

    • Use the Work Center form

      Part 1: Disable the workset enabled option 1. Open the Employees form. 2. Select Employee 1 from the left grid. 3. Clear the workset enabled check box found on the right-side of the form. 4. Click Save. 5. Click the X to close the Employees form. The ...

    • Work Center Navigation Home

      Part 1: Verify the Work Center Popup Enabled flag is set 1. Open the Transaction Set Maintenance form. 2. Select the SF WorkCenter UI parameter from the left pane. 3. Verify that the Work Center Popup Enabled flag is selected and the Parameter Value ...

    • Configure work center status parameters

      1. Open the Work Center Status Parameters form. 2. Select AS-500 from the Work Center drop-down list. 3. Verify 60 is in the Refresh Interval field. If not, type it. 4. Type 80 in the High Efficiency Level field. 5. Type 50 in the Medium Efficiency ...

    • Manage worksets

      Part 1: Leave team 1. Open the Work Center Navigation Home form. 2. Click Labor on left side navigation bar. 3. Click the Team Maintenance icon. 4. Select 1_<your initials> in the Team field. For example, 1_TP. 1_<your initials> will display in the ...

    • View Visual Dispatch form

      1. Verify the Miscellaneous icon on the left side of the Work Center Navigation Home form is selected to display the available menu buttons. If not, select it. 2. Click Visual Dispatch. The Visual Dispatch form displays. 3. Select DJ00000255 from the ...