Use the Work Center form

Use the Work Center form

Part 1: Disable the workset enabled option 
1. Open the Employees form. 
2. Select Employee 1 from the left grid. 
3. Clear the workset enabled check box found on the right-side of the form.
4. Click Save. 
5. Click the X to close the Employees form. The Work Center Navigation Home form displays.
Part 2: Job operations setup activities
1. Verify the Labor icon on the left-side of the Work Center Navigation Home form is selected to 
display the available menu buttons. If not, select it.
2. Click Work Center. The Work Center form displays. 
3. Select AS-500 from the Work Center drop-down list.
Note: This field is indicated with a Factory ( ) icon near the top of the form. 
4. Click the Job List tab.
5. Click DJ00000241. 
Note: The job will be highlighted in light blue when selected.
6. Click Start Setup. The Start Setup form displays. 
7. Verify DJ00000241 is displayed in the Job field. The Item number and description are 
displayed on the Details tab. 
8. Verify 0 is displayed in the Suffix field. 
9. Verify 30 is displayed in the Operation field. The Work Center where the operation will be 
performed is displayed under the Details section. 
10. Click the green Process icon. A message displays, “[Start Setup] was successful.”
11. Click OK. You will be returned to the Work Center form, and the job you selected will be moved 
to the Active tab. Note: The job will be highlighted in light blue.
12. Click End. The End Setup form displays. 
13. Verify DJ00000241 is displayed in the Job field. The Item number and description are 
displayed on the Details tab. 
14. Verify 0 is displayed in the Suffix field. 
15. Verify 30 is displayed in the Operation field. The Work Center where the operation will be 
performed is displayed along with the Start Time the setup activity started and the Elapsed 
Time. 
16. Click the green Process icon. A message displays, “[End Setup] was successful.” This stops
setup activity for the selected operation.
17. Click OK. You will be returned to the Work Center

    • Related Articles

    • Use worksets in the work center form

      Part 1: Enable the workset enabled option 1. Open the Employees form. 2. .Select your Employee number from the left grid. This is the Badge ID/Employee number you wrote down in Exercise 1.1, Part 2, Step 4. 3. Select the workset enabled check box ...

    • Work Center Navigation Home

      Part 1: Verify the Work Center Popup Enabled flag is set 1. Open the Transaction Set Maintenance form. 2. Select the SF WorkCenter UI parameter from the left pane. 3. Verify that the Work Center Popup Enabled flag is selected and the Parameter Value ...

    • Configure work center status parameters

      1. Open the Work Center Status Parameters form. 2. Select AS-500 from the Work Center drop-down list. 3. Verify 60 is in the Refresh Interval field. If not, type it. 4. Type 80 in the High Efficiency Level field. 5. Type 50 in the Medium Efficiency ...

    • Create work centers

      1. Click the Open icon on the toolbar. 2. Type work centers in the Filter field. 3. Click the Work Centers list item. 4. Click the OK button. The Work Centers (Filter in Place) form opens. 5. Click the Filter in Place icon. 6. Click to select the ...

    • Create work centers

      Part 1: Create the welding work center 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type work centers in the Filter field. 3. Click the web.WorkCenters list item. 4. Click the OK button. The Work Centers form opens. 5. ...