Create work centers

Create work centers

1. Click the Open icon on the toolbar.
2. Type work centers in the Filter field.
3. Click the Work Centers list item.
4. Click the OK button. The Work Centers (Filter in Place) form opens.
5. Click the Filter in Place icon.
6. Click to select the AS-500 work center from the grid on the left. 
7. Click Actions on the menu bar.
8. Click the Duplicate list item. The duplicate record is displayed on the line below.
9. Click in the Work Center field. 
10. Type [your initials]AS6 to replace the existing text.
11. Press Tab. 
12. Type Assembly in the Name field.
13. Verify you are on the Scheduling tab.
14. Verify 100 is selected in the Department field.
15. Click the Resource Groups tab.
16. Click the grid on the first line under the Group column. 
17. Click the Group drop-down arrow.
18. Click the AS-500-LRG list item.
19. Verify 1 is in the Quantity field.
20. Click the Save icon. 
21. Repeat steps 6 – 20 to create the other two work centers using the field values in the table below 
for each work center.
Work center             Description       Department       Resource Group       Quantity
[your initials]DRL2   Drilling                   200                   DRL-10-MRG             1 
[your initials]INS3     Inspection             300                   INS-20-LRG               1 
22. Click the X on the Work Centers form

    • Related Articles

    • Create work centers

      Part 1: Create the welding work center 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type work centers in the Filter field. 3. Click the web.WorkCenters list item. 4. Click the OK button. The Work Centers form opens. 5. ...

    • Work Center Navigation Home

      Part 1: Verify the Work Center Popup Enabled flag is set 1. Open the Transaction Set Maintenance form. 2. Select the SF WorkCenter UI parameter from the left pane. 3. Verify that the Work Center Popup Enabled flag is selected and the Parameter Value ...

    • Use the Work Center form

      Part 1: Disable the workset enabled option 1. Open the Employees form. 2. Select Employee 1 from the left grid. 3. Clear the workset enabled check box found on the right-side of the form. 4. Click Save. 5. Click the X to close the Employees form. The ...

    • Configure work center status parameters

      1. Open the Work Center Status Parameters form. 2. Select AS-500 from the Work Center drop-down list. 3. Verify 60 is in the Refresh Interval field. If not, type it. 4. Type 80 in the High Efficiency Level field. 5. Type 50 in the Medium Efficiency ...

    • Use worksets in the work center form

      Part 1: Enable the workset enabled option 1. Open the Employees form. 2. .Select your Employee number from the left grid. This is the Badge ID/Employee number you wrote down in Exercise 1.1, Part 2, Step 4. 3. Select the workset enabled check box ...