Set IP Parameters

Set IP Parameters

1. Click the Open icon on the toolbar.
2. Type ip par in the Filter field.
3. Click the IP Parameters list item.
4. Click the OK button. The IP Parameters form opens.
5. Click to clear the Auto Create In Process Test Plan check box.
6. Verify the Default for QC IP Inspection Tags check box is selected.
7. Verify the Display In Process Item Alerts In SyteLine check box is selected.
8. Verify the Display QC Window when creating Receiver check box is selected.
9. Verify Prompt is selected in the Create MRR For Reject field.
10. Verify Complete and Move is selected in the Map Non Scrap Qty To SL Jobtran Qty field.
11. Verify Create is selected in the Jobtran Action During Disposition field.
12. Verify Alert is selected in the Alert When Validating Quantities field.
13. Verify the Allow Quick QCS check box is selected.
14. Verify Prompt is selected in the Auto Create MRR field.
15. Click the Save icon.
16. Click the Close (X) button on the IP Parameters form

    • Related Articles

    • Set QC General Parameters

      1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type qc gen in the Filter field. 3. Click the QC General Parameters list item. 4. Click the OK button. The QC General Parameters form opens. 5. Verify the Prompt For Reason ...

    • Set up OPM parameters

      1. Click the Open icon. 2. Type shop floor in the Filter field. 3. Click the Shop Floor Control Parameters list item. 4. Click the OK button. The Shop Floor Control Parameters form opens. 5. Click the Outside Process Management tab. 6. Verify the ...

    • Set forecast parameters

      Part 1: View Planning Parameters settings 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type Planning Parameters in the Filter field. 3. Click the Planning Parameters list item. 4. Click the OK button. The Planning ...

    • Set supplier parameters

      1. Click the Open icon on the toolbar. 2. Type Supplier par in the Filter field. 3. Click the Supplier Parameters list item. 4. Click the OK button. The Supplier Parameters form opens. 5. Click the QC Location drop-down arrow. 6. Click the QC INSP ...

    • Set QC general parameters

      1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type qc gen in the Filter field. 3. Click the QC General Parameters list item. 4. Click the OK button. The QC General Parameters form opens. 5. Verify the Prompt For Reason ...