Set up OPM parameters

Set up OPM parameters

1. Click the Open icon. 
2. Type shop floor in the Filter field.
3. Click the Shop Floor Control Parameters list item.
4. Click the OK button. The Shop Floor Control Parameters form opens.
5. Click the Outside Process Management tab. 
6. Verify the Enable Outside Process Management check box is selected.
7. Click the Poitem Xref Method drop-down arrow.
8. Click the One Line list item. 
9. Verify Ordered is selected in the PO Status field. 
10. Verify Oper End Date is selected in the Po Due Date Calculation field. 
11. Click the Save icon. 
17 Lesson 1: Managing outside processes
12. Click the X on the Shop Floor Control Parameters form

    • Related Articles

    • Set forecast parameters

      Part 1: View Planning Parameters settings 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type Planning Parameters in the Filter field. 3. Click the Planning Parameters list item. 4. Click the OK button. The Planning ...

    • Set supplier parameters

      1. Click the Open icon on the toolbar. 2. Type Supplier par in the Filter field. 3. Click the Supplier Parameters list item. 4. Click the OK button. The Supplier Parameters form opens. 5. Click the QC Location drop-down arrow. 6. Click the QC INSP ...

    • Set IP Parameters

      1. Click the Open icon on the toolbar. 2. Type ip par in the Filter field. 3. Click the IP Parameters list item. 4. Click the OK button. The IP Parameters form opens. 5. Click to clear the Auto Create In Process Test Plan check box. 6. Verify the ...

    • Set QC General Parameters

      1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type qc gen in the Filter field. 3. Click the QC General Parameters list item. 4. Click the OK button. The QC General Parameters form opens. 5. Verify the Prompt For Reason ...

    • Set QC general parameters

      1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type qc gen in the Filter field. 3. Click the QC General Parameters list item. 4. Click the OK button. The QC General Parameters form opens. 5. Verify the Prompt For Reason ...