Verify scheduling parameters

Verify scheduling parameters

1. Click the Open icon on the toolbar. The Select Form dialog box opens.
2. Type scheduling in the Filter field. 
3. Click the Scheduling Parameters list item.
4. Click the OK button. The Scheduling Parameters (Filter in Place) form opens. 
5. Click the Filter in Place icon.
6. Verify 80 is in the Bottleneck Utilization Threshold field.
7. Verify 90 is in the Days to Schedule field.
8. Verify PCAL is selected in the Move/Finish/Buffer Shift ID field.
9. Verify the Schedule Firm Jobs check box is selected.
10. Click the X on the Scheduling Parameters form

    • Related Articles

    • APS Planning and Scheduling messages

      APS Planning and Scheduling Messages The errors listed in the table below appear on the APS Planning and Scheduling Messages form. Error Message Explanation and Solution ApsPlan: Error -30000 running the Planner. Network communications error. At some ...

    • Update planning parameters

      Part 1: Verify General parameter settings 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type planning parameters in the Filter field. 3. Click the Planning Parameters list item. 4. Click the OK button. The Planning ...

    • Set forecast parameters

      Part 1: View Planning Parameters settings 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type Planning Parameters in the Filter field. 3. Click the Planning Parameters list item. 4. Click the OK button. The Planning ...

    • Set up OPM parameters

      1. Click the Open icon. 2. Type shop floor in the Filter field. 3. Click the Shop Floor Control Parameters list item. 4. Click the OK button. The Shop Floor Control Parameters form opens. 5. Click the Outside Process Management tab. 6. Verify the ...

    • Verify jobs are scheduled

      If your job orders are not showing as scheduled then you must rerun APS Planning 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type job orders in the Filter field. 3. Click the web.JobOrders list item. 4. Click the OK ...