Create a Control Plan and Control Plan Test

Create a Control Plan and Control Plan Test

1. Click the Open icon on the toolbar.
2. Type control plan in the Filter field.
3. Click the Control Plan (QC Items) list item.
4. Click the OK button. The Control Plan (QC Items) (Filter in Place) form opens.
5. Click the Filter in Place icon.
6. Click the New icon.
7. Type mb* in the Item field.
8. Click the Item drop-down arrow.
9. Click the MB-11000 list item.
10. Click the Ref Type drop-down arrow.
11. Click the O list item.
12. Click to select the C of C Required check box on the Item/Inspect tab.
13. Click to select the First Article check box.
14. Type Example ALERT, using the comma separator in the Alert field.
15. Click the Inspection Frequency drop-down arrow.
16. Click the NA list item.
17. Click the Save icon.
18. Click the Control Plan Tests (QC Item Tests) button. The Control Plan Tests (QC Item Tests) 
(Linked) form opens. 
Note: The Seq field defaults to 10.
19. Click the Sev Level drop-down arrow.
20. Click the MINOR list item.
21. Type Inspection in the Characteristic field.
22. Click the Gauge Group drop-down arrow.
23. Click the VISUAL list item.
24. Click the Equipment drop-down arrow.
25. Click the EYES list item.
26. Click the Test Method drop-down arrow.
27. Click the Final Test list item.
28. Type 9 in the Expected Minimum field.
29. Type 10 in the Expected Maximum field.
30. Click the Save icon.
31. Click the Close (X) button on the Control Plan Tests (QC Item Tests) (Linked) form.
32. Click the Tests tab. The item test you just created displays.
33. Click the Close (X) button on the Control Plan (QC Items) form

    • Related Articles

    • Create a Control Plan and Control Plan Test

      Part 1: Set up test methods 1. Click the Open icon on the toolbar. 2. Type test methods in the Filter field. 3. Click the Test Methods list item. 4. Click the OK button. The Test Methods form opens. 5. Click the New icon. 6. Type Durability in the ...

    • Create a Control Plan and Control Plan Tests

      1. Click the New icon. 2. Type sa* in the Item field. 3. Click the Item drop-down arrow. 4. Click the SA-55000 list item. Note: the Ref Type defaults to J. 5. Click the Operation drop-down arrow. 6. Click the 40 list item. 7. Type 10 in the Test Seq ...

    • Create resource groups

      Part 1: Create welding resource group 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type resource groups in the Filter field. 3. Click the web.ResourceGroups list item. 4. Click the OK button. The Resource Groups form ...

    • Create work centers

      Part 1: Create the welding work center 1. Click the Open icon on the toolbar. The Select Form dialog box opens. 2. Type work centers in the Filter field. 3. Click the web.WorkCenters list item. 4. Click the OK button. The Work Centers form opens. 5. ...

    • Create a user journal

      1. Click the Open icon. 2. Type journals in the Filter field. 3. Click the Journals list item. 4. Click the OK button. The Journals (Filter in Place) form opens. 5. Click the Filter in Place icon. 6. Click the New icon. 7. Type [your initials] ...